KS136 12 Probe WaterProof Ultrasonic/Distance Sensor IIC/TTL Serial Port arduino

Description

4 probe = KS106
performance details:
Fast Free Ship Waterproof type ultrasonic sensor Ultrasonic distance measurement module KS106 4 probe IIC/TTL  serial port 13.8cm-600cm Waterproof ultrasonic ranging module
(Support bulk orders and Custom service orders )
~ Waterproof probe, blind area 13.8CM,range of 6 meters,beam Angle adjustable 50-100 degrees,
~ Send and receive an integrated probe
~ Can be independent detection and has to send and receive separation and correlation function.
~ A motherboard + 4 transceiver integrated waterproof probe
~ Working Voltage :3.0V-5.5V DC Power Supply,recommend 5.0-5.5V
~ Working temperature: -30°C to +85°C
~ Detection range:13.8CM-600CM  measure the wall could be 450cm,if measure people ,.it could be up to 150CM
~ Precision :1cm-2cm
~ Frequency up to 50Hz, that means it can detect 50 times/second
8/10/12 probes = KS136 performance details:
● Transceiver integrated design, 1 main control board is connected with 12 transceiving integrated waterproof probes, each probe works independently;
● Waterproof probe color is red, white, blue, green, black, yellow, other colors can be customized;
● Detection range: 13cm-450cm, the test can be up to 150cm;
● The detection frequency can reach 50Hz, that is, 50 times per second;
● Supports I2C/TTL serial interface, compatible with KS103 protocol; supports 485 interface;
● A total of 20 I2C/TTL/485 addresses that can be modified, ranging from 0xd0 to 0xfe (0xf0, 0xf2, 0xf4, except 0xf6, 8-bit address);
● 5s does not receive I2C control command and automatically enters uA level sleep, and can be woken up by host I2C control command at any time;
● Use industrial grade configuration, working temperature (-30 ° C ~ +85 ° C);
● Wide operating voltage range (3.0V~5.5V);
● The communication rate of I2C mode is 50~100kbit/s; the communication rate of TTL/485 serial port is 9600bps by default; the user can modify it to 115200bps;
● Adopt unique adjustable filter noise reduction technology, when the power supply voltage is disturbed or the noise is large, it can still work normally.
● Environmentally friendly lead-free.
8/10/12 probes =
KS136 electrical performance parameters:
~ I2C/TTL operating voltage: 3.0V~5.5V; or 12V~24V DC power supply (12V recommended).
~ Use 485 interface working voltage: 4.5V~5.5V; or 12V~24V DC power supply (12V recommended).
~ Please pay attention to ventilation and heat dissipation when using 24V voltage.
~ Note: It is recommended that the 12V~24V power supply be disconnected from 3.0V~5.5V; the 3.0V~5.5V power supply is disconnected when connected to
12V~24V.
~ Instantaneous maximum current during operation: 200mA at 5.0V, typical.
~ Working current: 100mA at 5.0V, typical
~ Maximum power consumption during sleep: 500uA at 5.0V, typical (Do not sleep in serial mode)
~ Power consumption: Using nanoWatt technology to save power, 5s does not receive I2C control command to automatically enter uA level sleep, and can be
controlled by host I2C at any time.
~ Instruction wake up