NEW Tiger fang Teeth 9-13cm Trowel box Stainless Steel Tiling Spreader 33-60cm

Description

NEW DESIGN FOR OUR CUSTOMERS - TIGER'S FANGS
There is 2 teeth 9cm/3,5" and 13cm/5,1"
Spreader ,  Trowel box for laying tiles (up to 60 cm) both on the floor and on the walls.
PLS,  NOTE I  we are able to made this  spreader-trowel box up to 80cm. Need made to order !You can message me!
Made of Stainless Steel with a thickness of 1.5 mm.
This Trowel Box  has compound teeth, the bottom tooth is 9mm and the top tooth is 13mm. If we take the average value, it turns out to be about 11mm (layer thickness is adjustable).
The width of the comb is 33cm/12.9"-607cm/23.6". Height 150 mm.
The specially designed Tiger's fangs  tooth shape is rounded to prevent adhesive from sticking to the spreader , resulting in custom-designed sreaders; when the tiles are placed on the adhesive, such ridges are destroyed, partially overlapping each other and providing maximum adhesive coverage.
The Tiger's Fangs Spreader  is designed for void-free tiling, providing a continuous adhesive coverage under the tile space (unlike standard spreader with rectangular teeth), which is especially important when laying tiles:
large format, when the presence of voids can lead to splitting of the tile under point loads;
in rooms with high humidity, for example, in swimming pools;
in places subject to temperature changes, for example, when facing facades, when laying under large windows.
This Trowel Box is used with all kinds and types of adhesive composition! Speeds up and simplifies the process of laying tiles on both floors and walls
It is intended for laying tiles of different sizes from 30 to 60 cm. (If the tile size is less than the partition that comes in the kit).
We present to your attention a sliding ridge, which greatly simplifies work on laying tiles to the floor and is possible in use when mounting a tile on the walls. The toothed comb allows you to apply glue into both the floor, the wall and, directly, on the tile. Comb can be used with all tiled adhesives.
Using tthis   transformer- comb, the glue application process on the floor was managed not only to speed up several times, but also to improve the quality of the applied adhesive (uniform thickness of the layer over the entire length, no samples of tile and re-adding adhesive, performance, etc.). Also, the purity of the work is another important factor. With a comb, the application process is much more careful than conventional gear spatulas. The width of the applied layer may vary with the help of convenient locks from 100mm to 660mm. The comb is made of a stainless steel with a thickness of 1.5mm, which is characterized by an increased resource of use and resistance to abrasion. Also does not damage the glazed coating of ceramics.
The process of applying glue on the tile:
With the help of clamps or self-screws, we embarrass the improvised machine for applying glue. Fix the comb 4 by self-reserves in the OSB plate or plywood at the same time sorting it on the required length of the tile. Under the teeth we stick your tile, pressing it to one edge of the comb. With the help of retainers on the side walls of the comb fix the teeth of the transformer over the tile. After that, exhibit the application width using an additional plank (supplied in the kit.) Next, we fall asleep the glau on the tile inside the ridge and pushing the tile through the Trowel Box